Peavey PZS 140 User Manual download pdf

SPECIFICATIONS

FEATURES:

¥ Five input channels

¥ Four zones

¥ 35 watt output per zone

¥ Two XLR low-Z mic inputs (balanced)

¥ Detachable input connector for Low-Z

mic and High-Z line on each channel

¥ Signal LED indicator for each channel

¥ Channel level control

¥ Low and high active EQ each channel

¥ Four zone assignment switches each

channel

¥ Front panel adjustable threshold and

paging hold on channels 1 and 2

¥ Four master output level controls with

signal and clipping LED indicators

¥ Detachable preamp output/power amp

input connector for each zone

¥ Each zone output provides a 4-ohm

direct output and transformer isolated

8-ohm, 25- and 70-volt outputs

¥ Each zone has 600-ohm line level

balanced output

¥ 19" standard rack-mount package

¥ Three rack spaces

¥ Externally accessible main fuse

POWER OUTPUT:

35 W RMS per zone @ less than 1%

(60 Hz to 20 kHz with all four channels

operating)

OUTPUTS:

Speaker: 4 ½ (direct), 8 ½, 25 V and

70 V (isolated)

Line: 600 ½ balanced, 1V RMS

CHANNEL 1 and 2 INPUTS:

Mic: 2k ½, -54 dBu

(1.5 mV, balanced)

Line: >50k ½, -18 dBu

(100 mV, balanced)

XLR Mic: 2k ½, -54 dBu

(1.5 mV, balanced)

CHANNELS 3 - 5 INPUTS:

Mic: 2k ½, -54 dBu

(1.5 mV, unbalanced)

Line: >50k ½, -18 dBu

(100 mV, balanced)

RCA: >50k ½, -18 dBu

(100 mV, unbalanced)

INSERTS:

Send: 1k ½, 2.21 dBu

(1 volt, unbalanced)

Return: 10k ½, 2.21 dBu

(1 volt, unbalanced)

FREQUENCY RESPONSE:

50 Hz to 20 kHz, +0/-2 dB (transformer)

SIGNAL-TO-NOISE RATIO:

Residual: 90 dB below rated power

(channel down, master full up)

Line Inputs: 90 dB below rated

power (controls nominal,

2k ½ terminated)

Mic Inputs: 82 dB below rated

power (controls nominal,

150 ½ terminated)

TONE CONTROLS:

Low EQ: +10/-10 dB @ 100 Hz

High EQ: +10/-10 dB @ 10 kHz

CONTROLS:

Channels 1 and 2:

Level, low EQ, high EQ, four assign

switches, signal presence, LED muting

threshold and adjustable release time.

Channels 3 - 5:

Level, low EQ, high EQ, four assign

switches and signal presence LED

Masters 1 - 4:

Level, signal presence and clipping LEDs

POWER SUPPLY:

Internal, 120 V AC @ 60 Hz

375 watts all channel at full power

175 watts all channel at 1/8 power

Five-amp fuse

DIMENSIONS: (H x W x D)

5.25" x 19" x 15"

(13.3 cm x 48.3 cm x 38.1 cm)

WEIGHT:

34 pounds (15.4 kg)

SPECIFICATIONS

PZS

140

Multi-Zone

Mixer/Amplifier

ARCHITECTURAL ACOUSTICS

1 2 3 4

Summary of Contents

Page 1 - SPECIFICATIONS

SPECIFICATIONSFEATURES:¥ Five input channels¥ Four zones¥ 35 watt output per zone¥ Two XLR low-Z mic inputs (balanced)¥ Detachable input connecto

Page 2 - 140 Dimensions

DESCRIPTION:The Peavey Architectural AcousticsPZSª140 is a five-channel mixingsystem with assignment capability to four independent powered zones.Each

Page 3 - 140 BLOCK DIAGRAM

Mic InputMic PreampLevelTwo Band EQXLRAssignmentSwitchesCHANNEL ONEMic InputXLRTwo Band EQLevelMic PreampAssignmentSwitchesCHANNEL TWOAssignmentSwitch

Page 4 - 140 Frequency Response

Features and specifications subject to change without notice.A Division of Peavey Electronics Corporations ¥ 711 A Street ¥ Meridian, MS 39301U.S.A. ¥

Comments to this Manuals

No comments

Peavey PZS 140 User Manual

Browse online or download User Manual for Audio Peavey PZS 140. Peavey PZS 140 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Peavey PZS 140