Peavey PCX-U302 User Manual download pdf (Page 10)

4. OPERATION INSTRUCTIONS

1. Turn the volume controls of the receiver and

device in use to a minimum setting before

turning on the microphone transmitter. After

the receivers power switch is set to the on

position, the power switch’s red indicator

illuminates to denote normal power status.

2. If the SIGNAL LED indicators of the receiver

are illuminated before switching on the

microphone or transmitter, it indicates the

receiver is receiving interference signals. The

more LEDs that illuminate the more severity of

interference. This system has “Pilotone” and

“NoiseLock” dual-squelch features so noise

output will not occur. If multiple channels are

used and both SIGNAL and AUDIO LEDs

illuminate before the transmitter is turned on,

simply adjust the Squelch controls clockwise

until the AUDIO signal indicators extinguish.

(Figure 9). However, by adjusting the squelch

controls it affects the sensitivity level of the

receiver, therefore, shortening the operating

distance and decreasing the stability.

Figure 9

3. Under normal circumstances, the SIGNAL

indicator lights up when a microphone or

transmitter is turned on near the receiver to

indicate the receiver is ready for normal

operation. Once sounds enter into the

microphone the AUDIO LED indicators will

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments