Peavey PCX-U302 User Manual download pdf (Page 18)

18

connection is used. If you are having problems

with a system, this is one of the first places to

look for the solution.

2. Transmit antenna: 1/4 wave

3. GT/MT level selector switch: This switch works

in combination with the way you have wired

the input device (as detailed above). Set this

switch in the GT position if you are connecting

to the output of and electric guitar. Set the

switch to the MT position for all other

connections.

4. Gain control: this control works when the

GT/MT selector switch is in the MT position

only. It provides the user with a small range of

independent system level control. Once set, it

should be left alone to avoid the user causing

self inflicted embarrassment by crossing the

threshold of feedback or reducing the output

to an inaudible level.

5. Transmitter housing: made from heavy duty

poly-plastic with a discreet low profile and

smooth contoured shape for wearer comfort.

6. Battery status indicator: A ‘flash’ at turn on

indicates that the batter is OK. No flash at turn

on indicates that the battery is dead or not

installed. A constant glow indicates a weak

battery that should be replaced.

7. Power switch: turns power to the transmitter

on and off. A RF link (if available) is opened

immediately the transmitter is switched on. An

AF link is established when a suitable audio

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments